Filter
AC 16-020
Fingerkit system size S, angle connector AC 16-020 for gripper module IEG 55-020 and CRG 30-050 as well as appropriate GRIPKITs
AC 20-025
Fingerkit system size L, angle connector AC 20-025 for gripper module IEG 55-020 and CRG 30-050 as well as appropriate GRIPKITs
AL-EC-M8-2M
GRIPLINK-ET4 data cable Ethernet RJ-45 to M8, UL/CSA, suitable for drag chain, 2 m
AL-EC-M8-5M
GRIPLINK-ET4 data cable Ethernet RJ-45 to M8, UL/CSA, suitable for drag chain, 5 m
AL-ETH-4P-5M
AL-ETH-4PW-5M
Ethernet communication cable, RJ-45 to M8 male angled, shielded, drag chain suitable, length 5 m
AL-FLE-21G
Power Supply cable GRIPLINK-U1, barrel plug 2.1 mm to open wire, length 2 m
AL-IOL-SG-5M
IO-Link cable, 4-pos. M12 male straight to 4-pos. M8 female straight, suitable for use with robots, length 5 m
AL-IOL-SW-5M
IO-Link cable, 4-pos. M12 male straight to 4-pos. M8 female angled, suitable for use with robots, length 5 m
AL-M8-4P-10M
Power Supply cable, 4-pos. M8 female straight to open wires, shielded, drag chain suitable, length 10 m
AL-M8-4P-5M
Power Supply cable, 4-pos. M8 female straight to open wires, shielded, drag chain suitable, length 5 m
AL-M8-4PW-5M
Power Supply cable, 4-pos. M8 female angled to open wires, shielded, drag chain suitable, length 5 m
AL-M8-6PW-5M
Power Supply cable for WSG 32, 6-pos. M8 female angled to open wires, shielded, drag chain suitable, length 5 m
BP-AL-URKIT
Basic plates BE-16
Basic plates BE-20
CLG series
Small parts handling, high precision, ultra-compact design, sensorless gripping force control, integrated part detection and monitoring, ESD conductive, LED status display, IO-Link interface.
CRG Series
Servo-electric Cobot gripper module, ISO/TS 15066 collaborative design, sensorless gripping force control, integrated part detection and -monitoring, PERMAGRIP® force retention, programmable LED ring, IO-Link interface.
DP 16-005
Fingerkit system size S, spacer plate DP 16-005 for gripper module IEG 55-020 and CRG 30-050 as well as appropriate GRIPKITs
DP 20-005
DP-ISO50-010
Spacer plate 10mm for gripping module CRG 30-050 to ISO 50 robot flanges
F-WSG-F
Attachment finger with interchangeable prism, passive, suitable for WSG 32 and WSG 50
F-WSG-FMF
Attachment finger with interchangeable prism and integrated force measuring, for WSG 32 / WSG 50. Enables a precise and highly dynamic force control.
FL-ISO50-2ISO50-90DEG
Mounting adapter, Delta 90°, 2 x ISO 50 robot flange to 1 x ISO 50 robot flange (ISO 9409-1-50-4-M6), to mount two gripper modules onto one robot.
FL-ISO50-CRG200
Mounting plate for gripper module CRG 200-085 to ISO50 robot flange (ISO 9409-1-50-4-M6)
FL-ISO50-CRG30
Mounting plate for gripper module CRG 30-050 to ISO 50 robot flange (ISO 9409-1-50-4-M6)
FL-ISO50-IEG55
Mounting plate for gripper module IEG 55-020 to ISO 50 robot flange (ISO 9409-1-50-4-M6)
FL-ISO50-IEG55 ESD
Mounting plate for gripper module IEG 55-020 to ISO 50 robot flange (ISO 9409-1-50-4-M6). ESD compliant version.
FL-ISO50-IEG76
Mounting plate for gripper module IEG 76-030 to ISO 50 robot flange (ISO 9409-1-50-4-M6)
FL-ISO50-IEG76 ESD
Mounting plate for gripper module IEG 76-030 to ISO 50 robot flange (ISO 9409-1-50-4-M6). ESD compliant version.
FL-ISO50-RPG120
Mounting plate for gripper module RPG 120-020 to ISO 50 robot flange (ISO 9409-1-50-4-M6)
FL-ISO50-RPG75
FL-ISO50-WSG32
Mounting plate for gripper module WSG 32-068 to ISO 50 robot flange (ISO 9409-1-50-4-M6)
FL-ISO50-WSG50
Mounting plate for gripper module WSG 50-110 to ISO 50 robot flange (ISO 9409-1-50-4-M6)
FL-ISO50-ZPG75
Mounting plate for gripper module ZPG 75-012 to ISO 50 robot flange (ISO 9409-1-50-4-M6)
Finger elements FE-16
Finger elements FE-20
Fingerkit starterset size L
Fingerkit Starter Set. Construction kit for application specific gripper fingers based on standard parts. Contains a basic selection of elements to build simple gripper fingers. Size 20, suitable for GRIPKIT-E2, GRIPKIT-CR2, IEG 76-030, CRG 200-085.
Fingerkit starterset size S
Fingerkit Starter Set. Construction kit for application specific gripper fingers based on standard parts. Contains a basic selection of elements to build simple gripper fingers. Size 16, suitable for GRIPKIT-E1, GRIPKIT-CR1, IEG 55-020, CRG 30-050.
GRIPLINK-ET4
Interface converter with integrated web interface for simple parameterization, control and monitoring of gripping modules of the series CRG, IEG, RPG, ZPG. Integration solutions available for robots from FANUC, YASKAWA and Epson. Other manufacturers and types on Inquiry. Supply voltage 24 V DC, interface 10/100 Mbps Ethernet. Connections 4x M12 IO-LINK, 2x M8 Ethernet, 2x M8 power supply. Dimensions (LxWxH) 145x34x25 mm.
GRIPLINK-U1
Grip inserts FT-16
Grip inserts FT-20
IEG PLUS series
Servo-electric gripper module with sealed controller (IP 54), optimized sensorless gripping force control, integrated part detection and monitoring, ESD conductive, Fingers pre-positionable, IO-Link interface.
IEG Series
Servo-electric gripper module, sensorless gripping force control, integrated part detection and monitoring, ESD conductive (optional), IO-Link interface.
OPT-GL-3RDPARTY
3rd-Party Option for GRIPLINK. Enables the integration of supported third-party field devices.
OPT-GL-MQTT
MQTT Option for GRIPLINK. Enables the continuous recording of operational data via MQTT for transfer to databases and cloud systems.
OPT-GL-PROXY
Proxy-Option for GRIPLINK. Enables the combination of multiple GRIPLINK Interface Converters behind a single software interface for connecting up to 32 compatible field devices.
OPT-WPG-PROXY
Proxy Option for WPG. Enables the combination of up to 8 WPG gripping modules behind a common software interface.
OPT-WPG-SCOPE
Grip Scope Option for WPG. Enables the recording and graphical evaluation of operating data for advanced analysis of the gripping process.
OPT-WSG-PN
Interface option PROFINET-RT for gripping modules WSG 32 and WSG 50. Provided as license key or pre-installed on the gripping module.